MicroBoards Technology Premium Pro Manuel d'utilisateur télécharger pdf (Page 19)

DVD Premium Pro LightScribe Series

The Load and Copy setting will load the master to the hard drive during the first burn cycle;

subsequent burns without leaving Copy mode or changing the master disc will use the hard drive

image as the source for added stability.

If you need to change masters when the Duplication Mode is set to Load and Copy, you must

return to the main 1. Copy menu.

The Prompt setting will ask you to specify Load and Copy or On the Fly when the Copy button is

pressed.

The On the Fly setting will use the loaded master disc in the reader drive as the source at all

times.

Counter

Use the Counter menu to enable or disable the Counter feature. The counter tells you how many

discs have copied and how many discs are left to go during the duplication process stopping the

job once the desired number of copies has been made.

DVD+R High Compatibility Mode

This feature allows you to turn the DVD+R High Compatibility Mode feature ON or OFF. The

purpose of this feature is to increase the compatibility of DVD+R media with a broader range of

DVD Video players.

ISRC

This option will allow you to enable/disable copying the ISRC code of an Audio CD. ISRC is the

serial number of the audio track that uniquely identifies the song in that audio track. This ISRC

code is commonly found in commercial Audio CDs and rarely seen on home made Audio CDs. By

enabling this feature, the duplication performance will be lowered.

Disable Drives

Use this utility to allow the system to disable certain drives/trays when certain drives/trays are

producing high failure rates.

External Connection

Use this setting to enable the hard drive in the duplicator to be used as an external drive

connected to your PC via a USB 2.0 connection.

The external connection to the hard drive in the duplicator allows you to create or copy ISO disc

images directly from your PC into the \dup directory on the LightScribe Premium Pro hard drive.

ISO images copied to that location will be available as hard drive partitions that can be selected

as the duplication source once the External Connection setting is OFF. No other image format is

supported.

Similarly, you can copy your LightScribe image files (.lsi extension) to the \labels directory to

allow them to be selected as the print image.

To connect the drive to your PC, you will need to connect your PC and the duplicator

using the supplied USB cable. Plug the flat end of the USB cable to your PC and the

square end to the connection on the back of the duplicator, shown to the right.

Select the Setup menu and use the ▼▲ buttons and press the ENT button the display reads

External Connection. If the display indicates that the connection is OFF, use either arrow key to

change the setting to ON, then press ENT to save the setting. The duplicator will be briefly

unresponsive as the hard drive is released from duplication mode. Press ESC to leave the Setup

menu.

While the External Connection setting is ON, the hard drive will be unavailable to the duplicator.

To turn OFF the External Connection allowing you direct access to the hard drive through

Windows, you will need to perform the following process:

Disconnecting the USB Hard Drive

1. Left-click the Remove Hardware icon in the tool tray in the right corner of your desktop.

The icon will appear either as a green arrow pointing left or a USB plug with a green

check mark on the right, depending on your Operating System.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

MicroBoards Technology Premium Pro Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Duplicateurs de médias MicroBoards Technology Premium Pro